β³ The board is erasing its flash. A change is held, and sent once the erase is done.
β Configuration saved but not applied β it takes effect at the next start. Press Reboot in the Config tab.
β Ready for the pad: the board will say OK to fly.
β A pyro timing value was outside what this board permits and has been brought into range β see the Config tab.
β Test mode: on USB this board detects a launch, fires its pyros and beeps as it does on battery. A reboot ends it.
State
β
Altitude
β
Max Altitude
β
Vertical Speed
β
Pressure
β
Flight Time
β
Uptime
β
This start
β
Pyro Channels
Pyro 1
β
Pyro 2
β
Armed
β
Emergency fire
β
USB
Host
β
Test mode
Active Configuration
Rocket ID
β
Rocket Name
β
Units
β
Pyro 1
β
Pyro 2
β
Re-fire every
β
Gap between channels
β
Rocket ID
up to 8 characters
Rocket Name
up to 8 characters
Units
Pyro 1
Mode
Value
Pyro 2
Mode
Value
Fire rules
A speed of 0 turns its rule off. A channel fires again while the descent stays faster than its
re-fire speed; every enabled channel fires, and keeps firing, while it is faster than the emergency speed.
Pyro 1 re-fire speed
Pyro 2 re-fire speed
Emergency fire speed
Re-fire interval
ms
Gap between channels
ms
Estimator
The flight obeys
Every estimator is flown and logged. Apogee and every trigger act on this one.
Apogee is decided by
The simple filter follows the raw readings and needs no model of the flight. Alone, it suits a pressure chamber; above about Mach 0.8 a static port's error can fool it.
Heights are in
The sensor's temperature on the pad, held from launch, sets how tall the air is: the same pressure is 300 m above the pad on a 15 Β°C day and 320 m on a 35 Β°C one. Sun on the airframe or a warm bay is in that temperature too.
Flight log
Every sample
Reading the space left for the logβ¦
Release pyro pins to Lua
Loading the board's capability tableβ¦
Pyro 1
Pyro 2
Common
Buzzer
Ground test
Saved with the rest of this tab. A release takes
effect at the next reboot.
β Changes take effect at the next start β Save, then Reboot
Flight Summary
Loading the flight logβ¦
Duration
β
Apogee
β
Pyro 1
β
Pyro 2
β
Altitude Profile
Loading the beep tableβ¦
Defaults follow Eggtimer, which is what most fliers already
have in their ear: ready-to-fly is a rapid chirp you never count, and a fault
is a repeating beep count. βΆ plays a row so you can hear it before
saving; the board must be on the pad.
Personality
Repeat
every ms
Status
β
Heartbeat
β
Pins assigned to Lua
Loading the board's capability tableβ¦
Enabled
Serial baud
LED string length
Program
Console
Flash storage
Loading the flash storageβ¦
Size
β
In files
β
Free
β
erased, ready
β
not yet erased
β
Free counts the pages a replaced or deleted file left, until the cleanup erases them.
The split comes from a scan of the flash, kept in this page, with each sector the cleanup erases since
counted as erased.